Southern State Sdn. Bhd.
9, 11 & 15, Lorong 1, Jalan Dewani, Off Jalan Tampoi, Majidee, 81100 Johor Bahru, Johor, Malaysia.
+607-332 1154 / 0984+607-334 3834
+607-331 6966
+6012-7966929(Mr. Yono/ Ms. Aini)
CEAB脱压式电动注油管
| 上一页 | 2 / 5 | 下一页 |
- The timer controls the operation and interval time. The electronic box has operation, abnormal and interval indicators.
- It has to work with volume distributors. If it is operated with CAB or CBB type distributor, it will feed oil during operation time. If it is operated with CDB or T type distributor, it will feed oil during interval time.
- Rationing oil feeding. The flow of oil of each output point of volume distributors is equal.
- It has a buzzer, which will alarm when the oil level is too low.
- It has a float switch that can detect the volume level of oil and will have abnormal signal automatically when the oil level is too low.
- It has a feed-oil button, press the button and the oil will feed immediately.
- It used a high quality alloy steel gear pump and induction motor that not only has steady output pressure and low noise, but also can assure each lubrication point with output of oil. It can be applied for large machines' request.
- When CEAB assembles with 25W motor, the max pressure is 20 kgf/cm2, the flow rate is 250cc/min. And when assembles with 60W motor, the max pressure is 30 kgf/cm2, the flow rate is 600cc/min.
- CEAB-4L has a pressure-regulating valve for adjusting the pressure and checking if the pressure is normal.
- CEAB series include CEAB-2, CEAB-4, and CEAB-8. The accessories for each model are different. Please look at the specification for further details.
