扳手

Spring loaded ball bearing socket retainer . A high quality wrench for the professional users .

The hinged link allows varied operations at varied angles to aid access in restricted areas .

Manufactured from chrome vanadium steel with a highly polished mirror finish. Mirror finish prevents oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. Made to American Federal Standards, extra thick heads offer higher torque forces to be applied therefore improved performance. Conform to ASME B107.9.

Made from chrome vanadium steel with mirror polish finish. Mirror finish prevents oil and dirt from adhering to the spanner, making for easier cleaning and preventing rust. 72-teeth ratcheting system which needs only 5 movement to operate ratchet. Thin wall design for greater access. Conform to DIN 838 and ANSI 8107.6.

For use where access is limited. With a built-in ratchet mechanism to provide speed and a reversible action which can be achieved by depressing the reversing lever or by simply turning the wrench over. All ratcheting ring wrenches are manufactured from chrome vanadium steel bi-hex rings.

Made from chrome vanadium steel with a satin finish body and highly polished heads, with double ended closed jaw bi-hexagon offset. Conform to DIN 838, BS 192 : 1982 & BS 3555 : 1998.

KEN-580-9020K


Manufactured to surpass the performance test BS2558: 1954. The sockets locate directly onto the handle relieving stress on the rivet. All sockets are plated, hardened and stress relieved to ensure they retain their shape.

Other size to be requested.

Manufactured from forged and hardened steel with machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners.

Designed to give greater flexibility and improved access when working in difficult conditions. Bi-hexagon (12 point). Manufactured from fully polished chrome vanadium steel. Conform with ANSI B107.5M.

KEN-501-0040K

Kennedy adjustable spanners are manufactured from high strength I beam section chrome vanadium steel for improved strength and rigidity, the jaws are heat treated for extended tool life. 15 offset head angle for positive torque control.

Open Jaw Spanners
Made from forged and hardened steel. Conform to DIN 894.

Manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset.

Made from chrome vanadium steel with a highly polished mirror finish. Made to American Federal Standards, giving higher torque therefore improved performance. Can be used on hydraulic pipes, brake pipes etc. The wrench will fit over the pipe to give a positive location on the nut. Conform to: ASME B107.4.


KEN5821040K  Other size to be requested.